<Product features>
● This is a 45L plastic bag (standard bag) that complies with the Food Sanitation Act, with a width of 650mm x height of 800mm and a thickness of 0.015mm.
●This is a standard semi-transparent bag (plastic bag) that can be used for a variety of purposes, such as storing, preserving, and dividing up various items.
● It is mainly made of high-density polyethylene, which is a crinkly (crunchy) material.
● This is a standard bag (polyethylene bag) that has excellent vertical tensile strength and remains strong even when made thin.
● A blend of highly flexible materials increases the strength of the bottom seal. Standard bags (polyethylene bags) that are easy to stretch and tie.
●Can be used in a wide range of situations, including food factories and processing plants, food preparation sites, kitchens and cafeterias.
● After use, it can also be used as a garbage bag.
●This product complies with the Food Sanitation Act.
<Precautions for use>
・This bag poses a choking hazard to infants and children. Keep out of reach of infants and children.
・Do not place in high temperature locations such as on a gas stove, in an oven, in a range with an oven function, or in a toaster oven. The bag may melt and become unusable.
-Please be aware that the material may tear if you put something with protrusions in the bag.
- Please note that friction, close contact (with floors, walls, other materials), or adhesion (with water, oil, alcohol disinfectant, etc.) to the printed surface of the package may cause the print to transfer or discolor.
・Do not store in direct sunlight or in hot, humid places. This may cause discoloration.
- An odor produced during polyethylene processing may remain in the product, but this does not affect safety or hygiene.
-The printing colour of the cardboard and packaging may vary slightly depending on the country of manufacture.
<Material Description>
[HDPE: High density polyethylene]
It is an abbreviation for High Density Polyethylene and is called high density polyethylene (Hi-den).
It has a crispy texture and a frosted, translucent color. It has excellent tensile strength. The film's stiffness means that it maintains its tensile strength even when made thin.
Its tensile strength is much greater than that of LDPE, but its tear strength is inferior, and once a cut is made in it, it will easily tear vertically.
It has excellent heat resistance of approximately 90°C to approximately 110°C (this does not indicate the heat resistance temperature of the product).
[Metallocene (M-LLDPE): Metallocene polyethylene]
It is an abbreviation for metallocene polyethylene and is a type of LLDPE. Polyethylene raw material produced using a "metallocene catalyst" is generally called "metallocene".
This LLDPE is polymerized using a metallocene catalyst, and the bonding strength between ethylene molecules is stronger than that of conventional LLDPE, resulting in significantly increased impact strength and tear strength.
By mixing it with conventional raw materials and manufacturing the product, the impact strength and tear strength are increased, making it possible to make thinner products than conventional products, thereby saving resources and creating products with a low environmental impact.
