<Product features>
● Plastic bags for disposing of asbestos Small size, 450mm wide x 600mm long, 0.15mm thick, yellow garbage bags (plastic bags).
●This product (yellow bag) is the primary bag (inner bag) for asbestos waste disposal.
● The body of this product (yellow bag) is printed with the message "Precautions for handling specially controlled industrial waste, waste asbestos, etc."
*Please check the "Handling Precautions" printed on the product before using.
● Put an appropriate amount of asbestos into this product (yellow bag), remove the air, seal it with a cable tie, etc., then place it in a transparent bag sold separately and double seal it.
*When disposing of asbestos, be sure to place it in a transparent bag (small size, product number: ASB12) sold separately and seal it with a cable tie or similar.
● After double sealing, dispose of it using the specified method.
● Please dispose of it properly in accordance with the Waste Management Act and the Manual for Disposal of Asbestos-Containing Waste, etc.
●For non-food use.
<Precautions for use>
・This bag poses a choking hazard to infants and children. Keep out of reach of infants and children.
・Do not place in high temperature locations such as on a gas stove, in an oven, in a range with an oven function, or in a toaster oven. The bag may melt and become unusable.
-Please be aware that the material may tear if you put something with protrusions in the bag.
- Please note that the printing may transfer or discolor due to friction, close contact (with floors, walls, other materials), or adhesion (with water, oil, alcohol disinfectant, etc.) on the printed surface of the bag itself and the printed surface of the packaging.
・Do not store in direct sunlight or in hot, humid places. This may cause discoloration.
- An odor produced during polyethylene processing may remain in the product, but this does not affect safety or hygiene.
-The printing colour of the cardboard and packaging may vary slightly depending on the country of manufacture.
<Material Description>
[LLDPE: Linear low-density polyethylene]
It is an abbreviation for Linear Low Density Polyethylene and is also known as linear low-density polyethylene (linear loden or loden).
It has a smooth and soft texture and is transparent in color. It has average tear strength and tensile strength. This type is generally referred to as low-density polyethylene.
LLDPE is a polyethylene that has superior sealing performance and physical strength to LDPE and is being used as the new main raw material instead of LDPE.
The heat resistance temperature is approximately 70℃ to approximately 90℃ (this does not indicate the heat resistance temperature of the product).
